Return to site

Hauppauge Wintv V8 Serial Kygen

broken image


Installation notes for WinTV v8.5: A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version. You must use WinTV v8 if you have a Hauppauge WinTV-HVR-930C (16xxx), the original Colossus, HD PVR model 1212, WinTV-HVR-1100, WinTV-HVR-1300, WinTV-HVR-1400, WinTV-HVR-3000, WinTV-HVR-4000 or WinTV-NOVA-HD-S2. WinTV v8.5 does not support these products. Click the Link to Download Hauppauge (CD) and WinTV 8 (2015) Crack Free Down.

Thread Tools
post #1 of 25Old11-21-2009, 03:52 PM - Thread Starter

Posts: 39
Liked: 10
If you've recently purchased a TV QAM tuner from Hauppauge and it came with a CD containing drivers and apps, do not throw it away thinking you can get the latest from their website.
I recently had a mega clear out of all sorts of old CD's including about a dozen Hauppauge CD's for the various Hauppauge HW I have owned or still use.
Hauppauge in their 'wisdom' now require you to have the original CD available if you wish to upgrade to latest apps.
So I was caught out !
If you don't have the CD they'll sell you a replacement :-(
Along with others I posted my distaste at this policy on their UK support forum - but my post was deleted as were other peoples - seems Hauppauge doesn't want to listen or comment to their customers who pay their wages.
This is a shame as I had recently been very impressed by their warranty service when one of my HVR-1600's started to fail.
Any suggestions as to alternate vendors who don't have such a retarded policy re drivers and apps ?
  1. Setting up WinTV tuner and Hauppauge TV Player. If you are not using the latest version of Windows 8, some graphics and information in this document may.
  2. [SOLVED] Workaround for bug in Hauppauge WinTV PVR-USB2 driver Wintv Driver Download This directory name is the serial number of your pvr-usb2. It should start with '.
Sharp LC-45GD7U
plus a ton of other HTPC equipment :-)

Buy HAUPPAUGE WinTV-quadHD PCI Express TV Tuner Card 1609: Internal TV. When your order ships, Amazon will scan the serial number and add it to the. WinTV v8, the new TV application for Windows, with TV pause and recording.

Sponsored Links
AVS Forum Special Member

Tagged: 0 Thread(s)
you should have taken the hint and gone right to media center and bypassed wintv altogether.
post #3 of 25Old11-21-2009, 07:26 PM - Thread Starter

Posts: 39
Liked: 10
Hi Mike,
True..
I've been running Win 7 MCE under Win 7 beta, then RC and now bought a copy and it works great - no need for any Win TV [email protected]
However the issue I have is with my other PC which runs XP for some legacy apps and from time to time I like to watch live TV on it using Win TV.
I must have spent well over $1000 with Hauppauge on a bunch of their cards including a HD-PVR which is hooked up to my HTPC - now only to find I can't up grade my XP box unless I buy a new CD.
Sharp LC-45GD7U
plus a ton of other HTPC equipment :-)
Sponsored Links
Member

Mentioned: 0 Post(s)
If you can find the WinTV v7 version 1.2a . you can install that and then 1.2b.
Luckily I still had 1.2a when I installed Win 7 and wanted WinTV installed (to help me figure out why I wasn't getting QAM)
post #5 of 25Old11-21-2009, 08:42 PM - Thread Starter

Posts: 39
Liked: 10
yep - that's what I had to do - found a version available on the web then upgraded to 1.2b.
Going beyond 1.2b doesn't seem possible without an original disk.
Just seems odd as the SW is so tied to the HW why would they need to enforce this original disk nonsense ?
Maybe some to do with patents / licensing.
Sharp LC-45GD7U
plus a ton of other HTPC equipment :-)

Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by jjkusaf1
If you can find the WinTV v7 version 1.2a . you can install that and then 1.2b.
Luckily I still had 1.2a when I installed Win 7 and wanted WinTV installed (to help me figure out why I wasn't getting QAM)

Do I an original disk NO
You can downlaod one older CD Kit I have on shspvr just look on the forum
Mainly this one
http://www.shspvr.com/ftp/download/h.W4_8_26351PPH/
Burn CD label as HCW4_8_26351PPH
Point the the new WinTV installer to the CD drive
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by timdf
If you've recently purchased a TV QAM tuner from Hauppauge and it came with a CD containing drivers and apps, do not throw it away thinking you can get the latest from their website.
I recently had a mega clear out of all sorts of old CD's including about a dozen Hauppauge CD's for the various Hauppauge HW I have owned or still use.
Hauppauge in their 'wisdom' now require you to have the original CD available if you wish to upgrade to latest apps.
So I was caught out !
If you don't have the CD they'll sell you a replacement :-(
Along with others I posted my distaste at this policy on their UK support forum - but my post was deleted as were other peoples - seems Hauppauge doesn't want to listen or comment to their customers who pay their wages.
This is a shame as I had recently been very impressed by their warranty service when one of my HVR-1600's started to fail.
Any suggestions as to alternate vendors who don't have such a retarded policy re drivers and apps ?

If have a Hauppauge CD just point it to the CD as long is fair new one with ver 6 on it just beware there are two CD type one MCE ver which has no apps
I all ready post this on shspvr forum.
I just look on UK forum I see lot people other ask about it you may want look a round they may move it in to one of other post
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by mike_311
you should have taken the hint and gone right to media center and bypassed wintv altogether.

Not really in min way WinTV is very useful
Location: Louisville, KY
Quoted: 4 Post(s)
Quote:
Originally Posted by SHS
Not really in min way WinTV is very useful

Not to mention that WinTV 7 is an entirely different animal from previous versions.
post #10 of 25Old11-21-2009, 10:16 PM - Thread Starter

Posts: 39
Liked: 10
Thanks for the tip / link- but there's a load of files there all about 34.8MB - would I need to download them all or just a certain one or two ?
Tim
Quote:
Originally Posted by SHS
Do I an original disk NO
You can downlaod one older CD Kit I have on shspvr just look on the forum
Mainly this one
http://www.shspvr.com/ftp/download/h.W4_8_26351PPH/
Burn CD label as HCW4_8_26351PPH
Point the the new WinTV installer to the CD drive

Sharp LC-45GD7U
plus a ton of other HTPC equipment :-)

Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by timdf
Thanks for the tip / link- but there's a load of files there all about 34.8MB - would I need to download them all or just a certain one or two ?
Tim

You need all 14 file it a full CD of ver 6
Posts: 1,647
Liked: 39
Quote:

yep - that's what I had to do - found a version available on the web then upgraded to 1.2b.

thats exactly what i had to do. i threw away the disk since it was an older version anyway. great thinking on hauppauge's end if you ask me.
Posts: 434
Liked: 16
Quote:
Originally Posted by mike_311
you should have taken the hint and gone right to media center and bypassed wintv altogether.

If all they're doing is making it more difficult to install WinTV, they're doing the people a favor.
Posts: 8
Liked: 10
Quote:
Originally Posted by SHS
Do I an original disk NO
You can downlaod one older CD Kit I have on shspvr just look on the forum
Mainly this one
Burn CD label as HCW4_8_26351PPH
Point the the new WinTV installer to the CD drive

OMG.you sir are an absolute life saver AND the links are still valid.
Thank you.
P.S. it seems that Hauppauge are still continuing this absurd policy until this very day
Posts: 1
Hauppauge Wintv V8 Serial Kygen
Liked: 10
Quote:
Originally Posted by little.dread.1
OMG.you sir are an absolute life saver AND the links are still valid.
Thank you.
P.S. it seems that Hauppauge are still continuing this absurd policy until this very day

Still works to this day! Thanks!
Posts: 1
Liked: 10
Just an FYI -- Hauppauge goofballs still sticking with this stupid policy. However thanks to the post above everything still works great. Download the RARs and EXE self extractor. Extract to a folder. Build an ISO file with the contents of the folder OR Burn a CD with the contents of the folder. Either way make sure the label is HCW4_8_26351PPH
Then insert or mount the disk to your drive and voila you can install WINTV 7 automatically!!!!!!
And to the user above who dissed the Hauppauge units. These are perfect for extraction of rare video from a household PVR. Or just clips of anything standard TV.
Spring 2013 everything works great and it still doesn't matter if you lost your silly Hauppauge CD.
THANKS SHS THIS IS BY FAR THE BEST 10$ I HAVE EVER SAVED!!!!!

Location: Vinita, Oklahoma
Quoted: 90 Post(s)

Posts: 46
Liked: 12

Hauppauge Wintv V8 Download

3 cheers to SHS! It appears that wintv is the only program that will allow me to recognize the s-video input on my hauppauge. I could not install Wintv because I was missing the disc, but you my friend have saved me time and money. Thanks very much!

Posts: 1
Liked: 10
'I used the HVR 1300 and now its on Ebay. But i couldnt find the old WINTV6 Software i needed to install WINTV 7 and use all features. Of course i can view TV via WIN MEDIA or other software but its not enough.
Perhaps somebody was in my rooms?!
Noboys home!?
12 US$ is the price.
Do you have a better solution for me?!
Answers to: [email protected]

Posts: 16
Liked: 10
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!

Location: Vinita, Oklahoma
Quoted: 90 Post(s)
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!
Sorry but I close down the web down some time ago.
Posts: 16
Liked: 10
Ah well, I'll keep looking. $10 isn't a lot. it's the principal of it. Now a day, it's not enough to sell you a product, they have to try to screw you into paying for what you already have. This should be illegal. I mean, how would someone feel if they were sold a car, after a year they put sugar in their gas tank so they would buy a new one? How is this right?

Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Ah well, I'll keep looking. $10 isn't a lot. it's the principal of it. Now a day, it's not enough to sell you a product, they have to try to screw you into paying for what you already have. This should be illegal. I mean, how would someone feel if they were sold a car, after a year they put sugar in their gas tank so they would buy a new one? How is this right?
Give this a try just burn to CD which may still work with WinTV 7 upgrade it not for WinTV 8 upgrading Attached Files
File Type: zipWinTV 7 Bypass Upgrade Check.zip (13.2 KB, 1372 views)
Newbie

Tagged: 0 Thread(s)
Originally Posted by filter4ever
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!
Sorry but I close down the web down some time ago.
I still have the ISO (using the hauppauge on both linux and windows after so many years and i don't feel the need to buy a new one).
Here's a new mirror (remove white spaces):
Posts: 16
Liked: 10
Thanks for the ISO. I already bought a CD and code, but can use it for the next computer for sure. I finally decided it was worth $10, since Windows 10 doesn't come with Media Center, and there were features in WinTV 8 that I found most useful (like streaming), not just a viewer and the driver. Since I could get the driver for free, no hard feelings towards Hauppauge. Considering how much I paid for the card ($3.99) I'm quite content
If you need help getting into your TV service menu or anything, I'll return the favor. I built an IR receiver / decoder / transmitter out of an Arduino, an IR photo sensor and LED. Hooks up to the USB to a serial console, working on my remote program.
I like this card, Windows 10 doesn't bitch as much as with my TV Wonder 650 (Got a USB, a PCI, and a PCIe), but it's got hardware encoding which is nice. They stopped supporting it at Vista, and you gotta 'Mickey-mouse' it to work with 10. Anyone have any ideas?
Sponsored Links
ReplyHome Theater Computers

Posting Rules
You may not edit your posts
HTML code is Off

view our sponsors showcase AVS Forum is proudly sponsored by

For the best viewing experience please update your browser to Google Chrome
We use cookies to improve your experience on this website and so that ads you see online can be tailored to your online browsing interests. We use data about you for a number of purposes explained in the links below. By continuing to browse our site you agree to our use of data and cookies.
Tell me more Cookie Preferences

Hauppauge wintv 8 serial number keyword after analyzing the system lists the list of keywords related and the list of websites with related content, in addition you can see which keywords most interested customers on the this website

Keyword Suggestions

Most Searched Keywords

Humana federal advantage dental 4
Hsbc branch manager salary 8
Productivity software for windows 10 12
Pa state police barracks bedford pa 16
Florida heavy road tax 20

Domains Actived Recently

› Alomaliye.com

› Bbs.duomiluntan.com

› Igywmibur.tk

Enable jit debugging windows vista. › M.visitmadison.org

› Na.industrial.panasonic.com

› Picardie-muses.fr

› Solihatarn.fr

› Thejigsaw.in

› Wisconsin4u.com

Websites Listing

We found at least 10 Websites Listing below when search with hauppauge wintv 8 serial number on Search Engine

› Hauppauge wintv 8 activation code

› Hauppauge wintv for windows 10

› Wintv 7 download free

Hauppauge Support WinTV v8 TV watching application

WinTV v8 is primarily for the Hauppauge WinTV-HVR-850, WinTV-HVR-950, Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1150, WinTV-HVR-1500 or WinTV-HVR-1600. WinTV v8.5 does not support these products. Activation for this version of WinTV v8 is done with your WinTV v7 CD-ROM or WinTV v8.5 Activation Code.

Wintv 8 serials and keys

Serial numbers for wintv 8: Hauppauge WinTV 7 HD. 11 % 09-03-2016. Similar search queries

Hauppauge Wintv V8 Serial Number Key - serialcore.com

HOME LINK TO US DMCA CONTACT. Hauppauge Wintv V8 Serial Number Key. Welcome to SerialCore.com your number one source for the latest serials! We are a new surfer friendly serial site without annoying advertisements, updated almost every day to make sure you find the serial number key code. that you are looking for :) .

Hauppauge Contact us

technical support contact form; France. Hauppauge Computer Works France; tel: +33 (0)658 029 107; email: [email protected]; tech support: +33 (0)658 029 107; [email protected] . ODM sales email: [email protected]; Tech support email: [email protected]; Home; About Us

Hauppauge 24 Digit Serial Number - apjogvero.wixsite.com

1159b5a9f9 Xbox One TV Tuner review: Just short of over-the-air . its name on an existing WinTV-HVR-955Q tuner from Hauppauge, . slicker design is nitpick number one.)wintv 7 serial Gratis download software a UpdateStar - Hauppauge WinTV un download gratuito di . o scaricare podcast gratuiti da iTunes Store 24 ore al .Prodinfo.exe is a program you can run which will extract information about .

Hauppauge Wintv V7 Serial Number Key - serialcore.com

HOME LINK TO US DMCA CONTACT. Hauppauge Wintv V7 Serial Number Key. Welcome to SerialCore.com your number one source for the latest serials! We are a new surfer friendly serial site without annoying advertisements, updated almost every day to make sure you find the serial number key code. that you are looking for :) .

Hauppauge Inc. - WinTV Wednesday Recently, someone asked .

During the installation, you will see the Activation Required message. You can activate by entering a WinTV v7 or v8 serial number or by putting in your WinTV v7 CD-ROM. Simply put your original WinTV v7 in your CD-ROM drive, click the box which says 'Check WinTV v7 CD' and you will be able to finish and activate your WinTV v8 application.

Hauppauge Wintv 7 Serial - turkeyerogon89z

Support: WinTV v8 TV. If you have a WinTV v7 or WinTV v8 activation code, click Enter Serial. Once you do this you can reinstall Hauppauge WinTV with. Hi all, long time lurker, second time poster. I'm at my wit's end with this EPG stuff because I upgraded my home PC from windows 8.1 to windows 10. I had windows media center installed.

Wintv Serial Key - lansima

Wintv v7 serial number - Media partner HAUPPAUGE WINTV HVR 2250 DRIVER. Official Hauppauge drivers download, download and update your Hauppauge 888) Product Code Installation The following message will appear when trying to install the WinTV 8 software on a computer with no CD/DVD drive or not in working order.

› Save ya gift card

› Ohio model united nations columbus

› Manage audio devices windows 7

› Dover st market

› Ginger ale punch

› Ricken rack math interactive

Top

New product installs:

If you have recently purchased a new WinTV product and your WinTV v8.5 Activation Code has never been used, you can install WinTV v10 with this code. This only applies to unused WinTV v8.5 Activation Codes.

Installation notes for WinTV v8.5:

You must use WinTV v8 (not WinTV v8.5) if you have one of the following products: a Hauppauge WinTV-HVR-850, WinTV-HVR-950, the original Colossus or HD PVR model 1212. WinTV v8.5 does not support these products.

A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version. If you do not have an Activation Code, but you have a WinTV v7 CD, you can install the WinTV v8 application.

If you do not have an Activation Code: If you do not have a WinTV v8/8.5 Activation Code, you can purchase the new WinTV v10 Activation Code on the Hauppauge webstore for $12.95. This can be used with WinTV-HVR, WinTV-dual and WinTV-quad products, as well as the HD PVR series of HD recorders plus USB-Live2 and the ImpactVCBe.

Extend: If you have an Activation Code for WinTV v8 or v8.5 with Extend, the latest version of WinTV v8.5 with Extend will automatically be installed.

Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v8.5 application and Windows driver package

WinTV v8.5 is the latest version of the WinTV v8 application for Windows. This download is a complete WinTV v8.5 application, including Windows drivers for supported WinTV products plus utilities.

WinTV v8.5 installer
For Windows 10, 8, and 7

File name: wintv85setup_37352.exe | File size: 96 MB | Date: Mar. 10, 2020
Release notes

To install the WinTV v8.5 application

Note: You will need to have your WinTV v8 Activation Code to complete this installation. If you do not have a WinTV v8 Activation Code, you can either buy one on the Hauppauge webstore for $9.95, or if you have a WinTV v7 CD, you can download and install the latest version of WinTV v8 application.

  • Step 1: Download the WinTV v8.5 installer by clicking the download button above. The WinTV v8.5 Installer is normally saved in the Download folder on your PC
  • Step 2: Run wintv85setup from the Download folder on your PC. Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
  • Step 3: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you, is printed on the WinTV v8 activation card or printed on your WinTV v8 CD. You do not need to enter the dashes, and you can use upper or lower case characters.
  • Step 4: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.

Keyboard Control in WinTV

  • Next Channel Plus (+)
  • Previous Channel Minus (-)
  • Increase Audio Volume 'Page Up'
  • Decrease Audio Volume 'Page Down'
  • Mute 'Ctrl + M'
  • Enter Preset Number '0 - 9'
  • Show Channel List 'Ctrl + L'
  • Make Snapshot 'Space Bar'
  • Show Now/Next 'Ctrl + O'
  • Display Stream Details 'Ctrl + D'
  • Subtitles on / off 'Ctrl + S'
  • Change Aspect Ratio 'Ctrl + A'
  • Pause Live TV 'Ctrl + Q'
  • Continue Live TV 'Alt + P'
  • Skip Ahead 'Ctrl + F'
  • Skip Back 'Ctrl + R'
  • Jump to Live Position 'Ctrl + C'
  • Full Screen 'Ctrl + W'
  • Exit Full Screen 'Esc'
  • Start TV 'Alt + T'
  • Start Recording 'Alt + R'
  • Stop Recording / Playback 'Alt + S'
  • Open File for Playback 'Alt + F'
  • Open WinTV Settings Dialog 'Ctrl + I'
  • Exit Application 'Alt + F4'

Where can I find the manual for WinTV?

In WinTV v8, right click your mouse in the live TV window, and go to Help. You will see our online manual.

You can also find the manual on our website in the Support -> WinTV v8 under the Manuals tab.

What do I need to upgrade the WinTV application from the Hauppauge website?

In order to upgrade to WinTV v8.5, you must have your WinTV v8 Activation Code. If you do not have an Activation Code , but you have a WinTV v7 CD, you can install the WinTV v8 application (look in the Support -> WinTV 8 Download tab).
If you do not have either a WinTV v8 Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8 Activation Code on the Hauppauge webstore for $9.95. The WinTV v8 Activation Code can then be used to activate WinTV v8.5

How do I rescan channels?

In WinTV v8, click on the setting button (Gear) in the lower left of the application. Then click on the Devices tab and highlight your WinTV device and click Tuner Setup (see the first picture below).

In the Device Setup Wizard, you will see a list of TV formats which your Hauppauge TV tuner can support. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs (see the second picture below). You can also select all formats and let the WinTV application show you what it finds in each format (if anything).

Click Next and Next and let WinTV scan for channels. The results should look like picture 3 below.

Settings -> Devices

click to enlarge

Device Setup Wizard

click to enlarge

Scan Complete

click to enlarge

I selected a channel but I just see 'buffering' in WinTV. Also there is no TV, just a blank screen

Buffering and no TV video can be caused by a few things:

  • If there is a problem with your TV signal. Check your antenna or coax cable going to the Hauppauge product.
  • If your anti virus software is preventing the WinTV application from making a temporary video buffer. If this is the case, you'll need to either disable the anti-virus software or create an exception for the WinTV application in your anti-virus exception list.
  • If you using a cable TV or satellite box, make sure the box is turned on.

I scanned for channels, and some were found, yet I do not see any channels listed in WinTV's channel list. What did I do wrong?

If you see channels during the scan, but no channels are listed in WinTV channel list (to see the channel list, right click your mouse on the live TV window, then select Find Channel), then something went wrong in the WinTV TV channel database.

Solution:

  • Uninstall WinTV completely: go to start/control panel/ and look for Program and feature and uninstall Hauppauge WinTV.
  • After that please restart the computer.
  • When the system comes back up please browse to the following folders and if you see a WinTV folder, delete the folder.
    • C:UsersPublic
    • C:Program Files or Program Files (x86)
    • Also please go to this folder which is a hidden folder and delete the Hauppauge folder: C:ProgramData
      Information on how to show hidden folders in Windows: Show Hidden Files and Folders in Windows 7, 8.x, 10, or Vista http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
  • Once you do this you can reinstall Hauppauge WinTV with latest version from website.
  • Now if you scan for channels, you should see them in the WinTV application.

Our local TV channel switched frequencies today. I've been unable to get the rescan to work. I can find all the channels on the rescan but can't seem to save them in the database.

We recommend that you delete the WinTV channel database before you re-scan for channels, especially if you think that your channel line up has changed. To do this, close the WinTV v8/v8.5 application and then run this program:
c:Program Files (x86)WinTVWinTV8WinTV8.exe -emptydb

I'm trying to schedule a recording with TitanTV, but the scheduled recording does not show up in the WinTV Scheduler

The channel list in TitanTV must match the channel list in WinTV. If, for example, you scanned WinTV with an over-the-air antenna but selected a cable TV line up in TitanTV, your channel line will be different and scheduled recordings will fail.

To understand why this happens, lets look at how the process of clicking the record button in TitanTV and how this turns into a WinTV Scheduled recording. When you click the red 'record' button in TitanTV, Titan delivers a .tvpi file to your PC which contains the details of the recording (channel number, channel name, time, date, etc.). But if the channel number doesn't match a channel which WinTV can tune to, WinTV ignores this attempt to schedule the recording and you will not see this scheduled item in the WinTV Scheduler.

There is a log file saved at c:userspublichauppauge wintvlogswintvtvpi.txt which shows the details of an attempt to schedule a TitanTV recording. Click here to see a sample of this information.

How can I save my WinTV Channels database?

To avoid having to rescan for TV channels, you can save the list of channels you are using. This is called Saving the WinTV Channels database.

To save your channel database go to:

C:UsersPublicWinTVChannel Database (Windows 7 and Vista)

C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)

Copy the hcwChanDB_5 file to a place for safe keeping. To replace saved Channels just copy HcwChanDB_5 back to Channel Database Dir.

Hauppauge Wintv V8

How can I reorder or change the channel numbers in WinTV?

Open the Settings menu in WinTV v8 by clicking on the 'gear' button in the lower left hand corner of the WinTV application. Then click on the 'All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.

Example:
You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:

  • click your right mouse button on 2704 in the All Channel list
  • change the Preset to 702
  • change the Name of the the channel to WNBC

    Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.

Wintv V8.5

Where can I find my recorded files?

The default directory for recorded files is:

C:UsersPublicVideos

You can change the default directory in WinTV v8 by clicking on the 'gear' button, then the Capture tab. Here you will see the Recordings Directory.

In Windows XP, files are recorded to:

C:Documents and SettingsAll UsersShared DocumentsMy Videos

Can I record TV shows with subtitles or closed caption?

Yes.
If the program you are watching has subtitles when you record you will also get the subtitles as part of the recording. When playing back recorded files in WinTV v8, you can use settings menu to turn the subtitles on or off. ( recorded sub titles can only be seen when using the WinTV v8 application for playback.)

Can I view and record my game play from external game sources with WinTV?

Yes, as long as you can connect the game system to either S-Video or composite video on your WinTV product. If so equipped, you can view and record the game action using the WinTV application software. For close to real time video, and to eliminate the normal delay, go to Settings/Advanced options and put a check mark in Game mode. Restart the WinTV application for the change to take effect.

WinTV v8 Installation Problems

Some virus software will prevent the WinTV application from completing the installation. If you find this, you will need to temporarily disable the virus sofware.

Here are a couple of virus applications and how to disable them:

  • AVG: 1) Right-click the AVG icon in the system tray next to the clock. 2) Click Temporarily disable AVG protection. 3) Choose how long you want the protection to be disabled and whether to disable the Firewall as well 4) then click OK.

I am getting a black screen in WinTV, or I'm seeing choppy video images. What can cause this?

There are two main reasons why you might see a black window:

TV Signal strength:. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.

Graphic display adapter related: The video graphics acceleration mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in 'Use hardware acceleration when possible'.

If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).

What video format will WinTV record in?

There are two types of recordings WinTV v8 will make: recordings from digital TV and recordings from analog TV.

Recordings from digital TV (ATSC, DVB or QAM) stay in the original digital TV format and in the original video quality. WinTV will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV Configuration menu.

When recording from analog TV (NTSC or PAL), recordings are made using MPEG2. You can choose the quality of your analog recordings in the Settings menu under Capture and then Default Analog Recording Quality.

What software can I use to edit & burn the recorded files from WinTV?

When recording digital TV, all recordings are made in whatever format your digital TV is being transmitted in. For example, ATSC is transmitted as MPEG-2 and therefore WinTV recordings will be MPEG-2. The files will be .TS files.

When recording from analog video or analog TV, WinTV will record MPEG-2 video using a .TS format. To edit your videos, you can use any software editor that can work with .TS files or MPEG-2 files

What file size will the recorded videos be?

Digital Broadcasts (ATSC or QAM) Yu gi oh the duelist of the roses ps2 iso torrent kickass.

The file size of a digital signal capture depends on the bitrate of the digital signal. The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for ATSC & QAM recordings range from approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.

Analog TV or analog video

The WinTV application converts analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:

Best - Approx 1 Hour+
Better - Approx 1 1/2 Hours
Good - Approx 2 Hours
Fair - Approx 3 Hours

How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV?

On those WinTV products with FM radio, you can scan for FM radio channels:

  • click the Setup button (gear button) on the lower left hand side of the WinTV app
  • click the Device tab
  • Choose your WinTV product, and then click Tuner setup
  • you should see a list of video and audio sourcs available on your Hauppauge TV tuner. Click Analog FM Radio and then Next
  • under Stations, select either Automatic Scan if you want the WinTV application to scan for FM radio stations, or Manual Entry if you want to enter your FM radio stations one at a time
  • then click Next to start the FM radio scan
  • the scan is complete when the message Scan complete is displayed
  • click Next and Next and you will be back to the main WinTV application
  • to select your FM radio channel, right click your mouse in the TV window and select Find Channel. You will see your FM radio channels at the end of your channel list.

How can I see the WinTV v8 channel list all the time?

You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v8 window to bring up Find channel. You will see the Channel list (see picture below).

In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v8 window.

Keyboard shortcuts

  • Ctrl A Aspect ratio
    Ctrl D Display the video and audio format of the TV program
    Ctrl F Freeze the video
    Ctrl Z Open TV Scheduler
    Ctrl O View program details (digital TV program, where provided in the broadcast)
    Ctrl S Display subtitles
    Ctrl W Full screen toggle
    Alt F Open File menu for playback
    Alt M Open the Task Menu
    Alt P Previous channel
    Ctrl Q Pause
    Ctrl P Play
    Alt R Record
    Alt S Stop
    Alt T Start TV
    Ctrl C Catch up
    Ctrl > Skip ahead
    Ctrl < Skip back

Problems running the WinTV application on Windows Server

If you want to use WinTV on your Windows Server, you may encounter the problem that it won't recognize any of your DVB devices. This is because there is no BDA support (Broadcast Driver Architecture) on Windows Server 2008 / 2012. So if you want to use BDA based hardware (i.e. DVB TV cards) it is neccessary to add BDA harware support manually.

To fix, see these instructions: https://marcowuen.wordpress.com/2012/08/13/howto-add-bda-hardware-support-to-windows-server-2008-r2/





broken image